Drives fence posts, signposts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. A tilt and grapple option can be added to any model for a true one-person operation (does not include t-posts). This option would allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the seat.
Features
- Models available for Skid-Steer, Front-End loader, and Euro/Global
- Drives anything from T-Post up to railway ties
- 82,000 lbs per stroke impact force
- 40” stroke with 300 lb hammer weight at 35 strokes per minute
- Optional tilt bracket allows for 20° adjustments left or right
- Requires 12 - 30 GPM
Specifications
|
Overall Length |
45.5" |
|
Overall Width |
25" |
|
Overall Height |
64" |
|
Tilt (side-side) |
N/A |
|
Machine Weight |
915 lbs (1,115 lbs w/ additional weight) |
|
Hammer Weight |
300 LBS (500 LBS MAX) |
|
Length of Stroke |
40" |
|
Max. Strokes per Minute |
35 |
|
Hydraulic Requirements |
1500-3000 PSI |
|
Maximum Post Width |
8.5" x 9.25" |
|
Impact Force |
82,000 lbs @ 500 lb weight |
|
Impact Energy |
1,025 ft-lbs @300 lb weight; |
*Hammer will still operate on machines with less than 12 GPM
with fewer strokes per minute.