Drives fence posts, signposts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. This tilt and grapple option has the ability make any model to a true one-person operation (does not include t-posts). This option allows the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the seat.
Features
- Models available for Skid-Steer, Front-End loader, and Euro/Global
- Drives anything from T-Post up to railway ties
- 82,000 lbs per stroke impact force
- 40” stroke with 300 lb hammer weight at 35 strokes per minute
- Tilt bracket allows for 20° adjustments left or right
- Loaded versions include tilt, grapple, and additional weight kit
- Requires 12 - 30 GPM
Specifications
|
Overall Length |
45.5" |
|
Overall Width |
25.5" |
|
Overall Height |
64" |
|
Tilt (side-side) |
20° |
|
Machine Weight |
1,005 lbs (1,205 lbs w/ additional weight) |
|
Hammer Weight |
300 LBS (500 LBS MAX) |
|
Length of Stroke |
40" |
|
Max. Strokes per Minute |
35 |
|
Hydraulic Requirements |
1500-3000 PSI |
|
Maximum Post Width |
8.5" x 9.25" |
|
Impact Force |
82,000 lbs @ 500 lb weight |
|
Impact Energy |
1,025 ft-lbs @300 lb weight; |
*Hammer will still operate on machines with less than 12 GPM
with fewer strokes per minute.